Modifications

Aller à : navigation, rechercher

Hangboard/fingerboard fait maison

1 105 octets ajoutés, 6 mars 2021 à 20:55
Update 3: new technique
===Update 3: new technique===
(written on the 06/03/2021 and translated on the XX06/XX03/XXXX2021)
[[Fichier:Forma.png|vignette]]
[[Fichier:Kisspng-epoxy-coating-gelcoat-fiberglass-water-5b18595fb2d616.2609853915283223997325.png|vignette]]
 
I took part in the initiation to the laser cutter offered by PING (super interesting, I recommend you if you have never approached this technology). During a discussion on the applications of this technology to my project with Adrien (thank you for the initiation and the advice by the way), he gave me a super interesting advice, it'snt possible to burn or to cut a part more which height is more than 8mm with the machines of the fablab (breil's workshop or platform C), so there wouldn't be engraving of the depth of the hangboard's grips on a block of wood taken out of the milling machine as mentioned before, but it is possible to glue pieces of wood together with wood glue or epoxy, with this technique the piece is no longer limited in height or almost. One solution to making a one-piece hangboard (different from the one I talked about in Update 2) would be to divide a hangboard design into 5 to 8mm sheets and glue them together afterwards. This solution brings new possibilities and freedom but also new constraints of shapes so I have to study it more before trying it, to be continued.
307
modifications

Menu de navigation