Modifications

Aller à : navigation, rechercher

TransmutationsDeBase

5 491 octets ajoutés, 4 mai 2016 à 08:03
code source
[[Fichier:Découpe laser capot transmutations.svg|800px]]
 
fichier fritzing du montage Arduino à venir
 
=== code-source ===
 
 
class Cooker
{
byte relaisPin;
unsigned long decalage;
unsigned long intervalle;
 
byte relaisEtat;
byte cookingEtat;
unsigned long prevMillis;
 
public:
Cooker(byte pin, unsigned long offset, unsigned long interval)
{
relaisPin = pin;
pinMode(relaisPin, OUTPUT);
 
decalage = offset;
intervalle = interval;
relaisEtat = LOW;
cookingEtat = 0;
prevMillis = 0;
}
 
void epochUpdate() {
prevMillis = millis();
}
 
void Update()
{
unsigned long currMillis = millis();
 
if ((cookingEtat == 0) && (relaisEtat == LOW) && (currMillis - prevMillis <= decalage)) {
relaisEtat = HIGH;
digitalWrite(relaisPin, relaisEtat);
Serial.print(int(currMillis / 1000));
Serial.print(" ColdStart relay ");
Serial.println(relaisPin);
Serial.println(" to ");
Serial.println(relaisEtat);
}
else if ((cookingEtat == 0) && (currMillis - prevMillis >= decalage)) {
cookingEtat = 1;
}
 
 
if ((cookingEtat) && (relaisEtat == LOW) && (currMillis - prevMillis <= intervalle)) {
relaisEtat = HIGH;
digitalWrite(relaisPin, relaisEtat);
Serial.print(int(currMillis / 1000));
Serial.print(" Cooking relay ");
Serial.println(relaisPin);
Serial.println(" to ");
Serial.println(relaisEtat);
}
else if ((cookingEtat) && (relaisEtat == HIGH) && (currMillis - prevMillis >= intervalle)) {
relaisEtat = LOW;
digitalWrite(relaisPin, relaisEtat);
Serial.print(int(currMillis / 1000));
Serial.print(" Cooking relay ");
Serial.println(relaisPin);
Serial.println(" to ");
Serial.println(relaisEtat);
}
else if ((cookingEtat) && (currMillis - prevMillis >= 10000)) {
prevMillis = currMillis;
Serial.print("RAZ Cooking relay ");
Serial.println(relaisPin);
}
}
void Stop() {
if (relaisEtat == HIGH) {
relaisEtat = LOW;
}
}
 
void Full() {
if (relaisEtat == LOW) {
relaisEtat = HIGH;
}
}
};
// constants attribution des pins
// 2, 3, 4, 5, 14, 19
 
// constantes decalage des cb avant de passer etat 2 =
// 9000; 11400; 12000; 12600; //
// Intervalle de chauffe durant l'etat 2 =
// 1500; 1900; 2200; 3000; //
 
unsigned int globalState ;
unsigned int prevGlobalState = 0;
 
unsigned long epoch = 0;
 
// on instancie
 
Cooker relais0(2, 9000, 1500);
Cooker relais1(3, 11400, 1900);
Cooker relais2(4, 12000, 2200);
Cooker relais3(5, 12600, 3000);
Cooker relais4(14, 8000, 2200);
Cooker relais5(19, 14000, 3500);
 
 
////////////////////////////////////////////////
/////////////// telecommande RF ///////////////
////////////////////////////////////////////////
 
/*The following 4 pin definitions,correspond to 4 buttons on the remote control
//(The telecontroller is Remote Wireless Keynob 315MHz(SKU:FIT0355))*/
const unsigned int D1 = 8; //The digital output pin 1 of decoder chip(SC2272)
const unsigned int D2 = 9; //The digital output pin 2 of decoder chip(SC2272)
const unsigned int D3 = 10; //The digital output pin 3 of decoder chip(SC2272)
const unsigned int D4 = 11; //The digital output pin 4 of decoder chip(SC2272)
const unsigned int ledPin = 13; //Receiving indicator
 
volatile int stateRF = LOW;
 
void setup() {
Serial.begin(9600);
epoch = millis(); // pour stocker le chrono depuis le démarrage
//========== RF =======================
pinMode(D4, INPUT); //Initialized to input pin, in order to read the level of
//the output pins from the decoding chip
pinMode(D2, INPUT);
pinMode(D1, INPUT);
pinMode(D3, INPUT);
pinMode(ledPin, OUTPUT);
attachInterrupt(1, blink, RISING); //Digital pin 3,interrupt 1,corresponds to
//receiving interrupt pin of the decoding chip
digitalWrite(ledPin, LOW);
}
 
void loop() {
 
ecouteRadio(); // la commande RF actualise l'etat global
 
if ((globalState == 1) || (globalState == 2)) {
relais0.Update();
relais1.Update();
relais2.Update();
relais3.Update();
relais4.Update();
relais5.Update();
}
else if (globalState == 0) {
relais0.Stop();
relais1.Stop();
relais2.Stop();
relais3.Stop();
relais4.Stop();
relais5.Stop();
}
else if (globalState == 3) {
relais0.Full();
relais1.Full();
relais2.Full();
relais3.Full();
relais4.Full();
relais5.Full();
}
}
/////////////// les fonctions //////////////////////
 
 
void blink()
{
stateRF = ! stateRF;
}
//////////////////////////////////
void ecouteRadio() {
delay(1);
digitalWrite(ledPin, HIGH);
// Serial.print("Locked ");
// Read individually output pins of the decoder chip,
if ((digitalRead(D4) == 1) && (globalState != 0)) { // locked icon == stop
globalState = 0;
Serial.println("Locked = STOP");
}
if (digitalRead(D2) == 1 && globalState != 1) { // unlocked icon == cold start
globalState = 1;
epoch = millis();
Serial.println("Unlocked : Cold Start");
}
if (digitalRead(D1) == 1 && globalState != 2) { // blitz icon == cooking
globalState = 2;
Serial.println("Blitz : Cooking");
}
if (digitalRead(D3) == 1 && globalState != 3) { // alarm icon == full throttle
globalState = 3;
Serial.println("Alarm : FULL");
}
digitalWrite(ledPin, LOW);
}
Emailconfirmed
471
modifications

Menu de navigation