Hangboard/fingerboard fait maison

De fablabo
Aller à : navigation, rechercher


...

JoliAfficheur.jpg

Contributeur·ice·s

Statut du projet

Concept

Statut de la publication

Brouillon

License

CC-by-sa-3.0 - Creative Commons Attribution CC-by-sa-3.0 France

Inspiration

Fichiers source

Machines

Matériaux

Lien





Introduction: Je suis passionné d'escalade et jusqu'en février 2020 j'allais toutes les semaines dans une salle d'escalade pour m'entrainer pendant 3ans. Pendant le premier confinement je n'ai pas pu m'entrainer malheureusement car je n'avais aucun équipement chez moi . J'ai commencé à regarder sur internet et j'ai vu ces hangboard/ fingerboard faits de bois ou de polyester (PE) ou de Polyuréthane (PU) (les 2 derniers sont les matériaux utilisés pour les prises d'escalade).

Exemple de hangboard.jpg

Il existe plein de modèles en vente sur internet mais peu me conviennent car ils sont soit trop grands soit trop chers. J'ai donc commencé à faire des recherches et je me suis rendu compte que cet objet pouvait être réalisé soi même avec l'utilisation d'une CNC ou d'une imprimante 3D. De plus avec cette solution "fait maison" je pourrai choisir quelle forme, taille et prises il y aura. Pour finir je pense que si j'arrive à produire un objet fonctionnel je le personnaliserai en la gravant au laser avec des indications sur la profondeur des trous (qui peut varier d'un trou à l'autre en fonction du design choisi) ou quelques blagues ou références à des jeux vidéos.

exemple de réalisation à la CNC: https://www.youtube.com/watch?v=GqKXfgYmYnY&t=1075s https://www.youtube.com/watch?v=jZM4e-bpJ3o exemple de réalisation à l'aide de l'impression 3D: https://www.youtube.com/watch?v=ZEeW0PrMDNk exemple de modélisation 3D de hangboard https://www.youtube.com/watch?v=jZM4e-bpJ3o

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// introduction: I enjoy indoor climbing and i did it every week in a climb gym every week for 3 years until february 2020. During lockdown, I realised i wasn't able to train like before because i hadn't any training tool do do it, so i searched on the web and i found something that would fit my need, it is called hangboard or fingerboard and it is made of wood or polyester (PE) ou de Polyuréthane (PU) (climbing holds are made of this last 2 materials).

Exemple de hangboard.jpg

A lot of them are on sale on the internet (amazon, etsy, ebay, ...), the one found were very good, but weren't perfect for me, it was either to expensive or to big. That's why i started watchinng on facebook groups, reddit and other blog if someone has already tried, and the answear is yes. Some people used a 3d rointer and glued the part on a wood plate and some people used a bigger wood plate and used a CNC. The advantages of an homemade hangboard are: -I will learn how to use all this tools -I will be able to design it to fit perfectly my needs (and if it's not perfect it will be my fault) -I will be able to add things with a laser engraver like the value of depth of the hole (it can change if you choose to in the 3D model), drawings of little jokes or video games character)

example of the usage of a CNC to build an hangboard: https://www.youtube.com/watch?v=GqKXfgYmYnY&t=1075s https://www.youtube.com/watch?v=jZM4e-bpJ3o example of the usage of a 3D printer to build an hangboard: https://www.youtube.com/watch?v=ZEeW0PrMDNk example of 3D modeling of an hangboard: https://www.youtube.com/watch?v=jZM4e-bpJ3o