Hangboard/fingerboard fait maison : Différence entre versions

De fablabo
Aller à : navigation, rechercher
(Update 5 : un pas en avant, deux pas en arrière)
(Update 5 : un pas en avant, deux pas en arrière)
Ligne 319 : Ligne 319 :
 
https://www.yeggi.com/q/max+grip+max+climbing+by/
 
https://www.yeggi.com/q/max+grip+max+climbing+by/
  
[[Fichier: yeggi.Png|vignette]]
+
[[Fichier: Yeggi.png|vignette]]
  
 
  Lien direct vers les 2 fichiers STL :
 
  Lien direct vers les 2 fichiers STL :

Version du 9 mars 2021 à 20:18


conception et réalisation d'un hangboard/ fingerboard personnalisé au fablab



////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

A lire s'il vous plaît/ Read this please

Bonjour, merci du temps que vous prenez pour lire ce message. J'essaie de traduire la page de mon projet en anglais en dessous si cela vous intéresse, si vous voulez ajouter des idées, des commentaires ou des questions à mon projet faîtes vous plaisir tant que vous laissez ma partie intacte, merci d'avance. La version anglaise peut avoir un peu de retard sur la version anglaise, si c'est le cas je m'en excuse.
Hello, thank you for taking the time to read this post. I'm trying to translate this page in english below if you are interrested, feel free to add your ideas, your comments and your questions on my project, as long as you let my part unchanged, thanks. The english part could be a bit late compared to the french one, if so, I'm sorry.

Arthur ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Français / French

Introduction

(écrit le 16/02/2021 et traduit le 16/02/2021)

Je suis passionné d'escalade et jusqu'en février 2020 j'allais toutes les semaines dans une salle d'escalade pour m'y entrainer pendant 3 ans. Pendant le premier confinement je n'ai pas pu m'entrainer malheureusement car je n'avais aucun équipement chez moi . J'ai commencé à regarder sur internet et j'ai vu ces objets d'entrainement et renforcement musculaire appelés hangboard ou fingerboard (planche à doigts ou à suspendre littéralement), ces planches sont soit faits de bois soit de polyester (PE) soit de Polyuréthane (PU) (NB: les 2 derniers sont les matériaux utilisés pour les prises d'escalade).

Exemple de hangboard.jpg

Il existe plein de modèles en vente sur internet (amazon, etsy, ebay, ...) mais peu me conviennent car ils sont soit trop grands soit trop chers soit pas en stock ou pas livrés en France. J'ai donc commencé à faire des recherches sur reddit, des blogs et des groupes facebook et je me suis rendu compte que cet objet pouvait être réalisé soi même avec l'utilisation d'une CNC pour transformer une planche de bois en hangboard ou d'une imprimante 3D en collant des prises de main avec de l'epoxy à une planche en bois. De plus avec cette solution "fait maison" je pourrai choisir:

  • la forme/ profondeur des prises pour que ce hangboard réponde parfaitement à mes besoins et si ce n'est pas le cas je ne pourrai m'en prendre qu'à moi même
  • la taille pour quelle soit en adéquation avec mes besoins, capacités et mes sacs (une autre solution serait de l'attacher dehors tel que: https://www.instagram.com/p/CLXfngiDtZh/ )
  • la personnalisation avec une graveuse laser (profondeur des trous, qui peut changer d'un trou à l'autre en fonction du design comme on peut le voir sur l'une des premières images du site suivant: https://blocshop.com/zlagboard-le-hangboard-intelligent/ ou sur ce post instagram https://www.instagram.com/p/CJ-3kH3refc/) ou quelques blagues ou références à des jeux vidéos., des dessins ou des petites blagues ou références et personnages de jeux vidéos)
  • Ainsi qu'apprendre à utiliser les outils du fablab.

Quelques projets qui m'ont inspiré:

  • exemple de réalisation à l'aide d'une défonceuse:

https://www.reddit.com/r/climbing/comments/f5azoo/i_made_a_portable_hangboard_this_is_now_my_main/ https://www.youtube.com/watch?v=LSRrjSp5Y6Q&feature=youtu.be

  • exemple de réalisation à la CNC:

https://www.instagram.com/p/CI-2ElrBbrI/?utm_source=ig_web_copy_link

https://www.youtube.com/watch?v=GqKXfgYmYnY&t=1075s

https://www.youtube.com/watch?v=jZM4e-bpJ3o

  • exemple de réalisation à l'aide de l'impression 3D:

https://www.youtube.com/watch?v=ZEeW0PrMDNk

  • exemple de modélisation 3D de hangboard:

https://www.youtube.com/watch?v=jZM4e-bpJ3o

  • solution de facilité que je préférerai éviter si possible:

https://www.youtube.com/watch?v=R7qPZ8QKBqE

Update 1: idées de design

(écrit le 17/02/2021 et traduit le 24/02/2021)

Après plus de recherches je me suis rendu compte que si je faisais mon propre hangboard je pouvais aussi réaliser quelques améliorations par rapport à un hangboard basique tel que les suivantes:

  • un hangboard avec une gravure laser dessus tel que le suivant:

https://www.etsy.com/fr/listing/796412206/gemini-top-out-climbing-split-portable?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=portable+hangboard&ref=sr_gallery-1-6&from_market_listing_grid_organic=1

https://www.instagram.com/p/CKL4-rRHCYh/

  • un hangboard compact et portable avec un corde qui sert à la suspendre ou des trous pour l'attacher sur des visses déjà mises dans une mur ou une poutre. Voici des designs que je trouve sympa:

https://www.instagram.com/p/CKI8JuwDX9-/

https://www.instagram.com/p/CKRapK2jdR4/

https://www.instagram.com/p/CJ616qWFJjg/

https://www.instagram.com/p/CJGBC1sD6nO/

https://www.instagram.com/p/CJ_MSVIDEGM/

https://www.instagram.com/p/CJ_Mez-j9zd/

https://www.instagram.com/p/CJ_MhwyDowk/

https://www.instagram.com/p/CJ1zCUJjAI2/

https://www.instagram.com/p/CJjSlNuj-g7/

https://www.woodrock.fr/produit/poutre-descalade-transportable/

https://www.ebay.fr/i/114162367263

https://www.tensionclimbing.com/product/flash-board/

https://www.ebay.fr/itm/Escalade-Climbing-Fingerboard-Portable-Hangboard-Training-Board-Hang-pair-/114162384871

  • un support pour téléphone pour chronométrer le temps des exercices avec une encoche sur le haut du hangboard en bois ou support imprimé en 3D tel que les suivants:

https://www.instagram.com/p/CKw3PfqDrkS/

https://www.instagram.com/p/CLZj6GIoGil/

https://www.instagram.com/p/CJ1FNulreEu/

https://www.instagram.com/p/CIycN_Kl5Ol/?utm_source=ig_web_copy_link

https://www.thevola.com/product/hangboard/

https://trainingforclimbing.com/hangboard-finger-training-repeaters/

  • J'ai aussi vu des petit sac de transport customisés qui me donnent bien envie (peut-être pour un autre projet qui sait...), un exemple plutôt simple:

https://www.instagram.com/p/CKMq0cajHNh/

https://www.instagram.com/p/CKNAoWGjWe9/

https://www.instagram.com/p/CKFTi9njqi2/

  • un hangbaord avec un par main pour qu'il soient encore plus compactes, transportables et faciles à faire (chaque hangboard serait relié à une corde pour le suspendre à une poutre ou des visses fixées à un support au préalable) tel que les suivants:

https://www.instagram.com/p/CKzJK1ICTHM/

https://www.instagram.com/p/CKSAf09Hk7P/

https://www.instagram.com/p/CJ_3tGlHSHQ/

https://www.instagram.com/p/CJdTBrFDAbY/

https://www.instagram.com/p/CJq4l-BJ175/

https://www.oliunid.fr/vola-portable-hangboard-prises-portables-d-escalade.html

https://www.maxclimbing.com/shop/training-equipment/maxgrip/

maxgrip:

poids:1.6kg

dimensions: 21.5 × 15 × 10.5 cm

si je veux le modéliser je n'ai plus qu'à appliquer une règle de trois sur les valeurs connues et grâce aux dessins disponibles sur leur site internet, cité plus haut

  • un support fixe pour les hangboard à une main précdents pour le fixer à la maison tel que le suivant:

https://www.instagram.com/p/CLRKDBFDrB5/

https://www.maxclimbing.com/shop/training-equipment/basewood/maxgrip-combo/

https://www.maxclimbing.com/shop/training-equipment/basewood/maxgrip-combo/

  • un hangboard connecté, un autre projet?

solutions en vente:

https://www.thegearcaster.com/2014/07/zlagboard-a-smart-hangboard.html https://climbro.com/

https://www.kickstarter.com/projects/entralpi/entralpi-make-your-hangboard-smart

solutions DIY:

http://timetotinker.weebly.com/smart-hangboard

https://www.reddit.com/r/climbharder/comments/doqioq/isometryx_opensource_digital_hangboard/

  • d'autres hangboard avec des design compactes et portables intéressants

https://www.instagram.com/p/CLPQL_mng3X/

https://www.instagram.com/p/CJWlKi0JQ4W/

https://www.instagram.com/p/CJUAXpRnmrD/

https://www.instagram.com/p/CLKwnvjjqZL/

https://www.instagram.com/p/CKNKvt5jg-Q/

https://www.instagram.com/p/CKxT5HJgfLD/

https://www.thegearcaster.com/2017/02/training-grips-for-both-rock-and-alpine-climbing.html

https://www.oliunid.fr/problemsolver-triangle-prise-portable-d-escalade.html

https://www.oliunid.fr/rustam-climbing-monik-mono-doigt-portable.html

https://www.oliunid.fr/woodoclimb-twins-prise-d-escalade-portable.html

https://www.oliunid.fr/rustam-climbing-quadrock-prise-portable-d-escalade.html

https://www.oliunid.fr/iseclimb-factory-hangy-prises-portables-d-escalade.html

https://www.oliunid.fr/metolius-wood-rock-rings-prises-portables-d-escalade.html

https://www.etsy.com/fr/listing/649526066/ensemble-de-gstring-portable-rock?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=portable+hangboard&ref=sr_gallery-1-29&from_market_listing_grid_organic=1&cns=1

https://www.etsy.com/fr/listing/840445479/anneaux-delta-hangboard-portable-blocs?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=portable+hangboard&ref=sr_gallery-1-15&from_market_listing_grid_organic=1

https://www.etsy.com/fr/listing/800958289/the-pretzel-hangboard-set-of-2-hexs?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=portable+hangboard&ref=sr_gallery-1-10&from_market_listing_grid_organic=1&sca=1

https://youtu.be/W-5o6Y7rjQw

  • un anneau pour attacher le sac de magnésie et les brosses de prises d'escalade et clef allen

https://www.instagram.com/p/CLZj6GIoGil/

https://www.instagram.com/p/CLUbkhHoQA7/

https://www.instagram.com/p/CKkE7PJDY8t/

https://www.instagram.com/p/CJ9L4jtnd7f/

https://www.instagram.com/p/CJ2yAHtjtzT/

  • un support externe tout fait de bois qui évite te tendre des fil du plafond ou de faire des trous dans des murs ou poutres

https://www.instagram.com/p/CJLXnLWjoEV/

  • anneaux sur les cotés pour tenir des boules d'entrainement ou des hangboard une main portables

https://www.instagram.com/p/CJJQy6LjEAw/

Update 2: choix d'un design et début de la modélisation

(écrit le 24/02/2021 et traduit le 05/03/2021)

Je me suis finalement décidé, mon premier prototype sera inspiré par le design des maxgrip et sera imprimé en 3D, en fonction des résultats, je continuerai pour trouver une meilleure solution mais si ce dernier répond à mon CDC (cahier des charges) le projet s'arrêtera là.

Pour rappel le constructeur nous donne les dimensions suivantes:

21.5 × 15 × 10.5 cm

liste images utilisées pour la modélisation 3D:

Update 3: nouvelle technique

(écrit le 06/03/2021 et traduit le 06/03/2021)

Forma.png
Kisspng-epoxy-coating-gelcoat-fiberglass-water-5b18595fb2d616.2609853915283223997325.png

J’ai suivi l’initiation à la découpeuse laser proposée par PING (super intéressant, je vous conseille si vous n’avez jamais approché cette technologie). Au cours d’une discussion sur les applications de cette technologie à mon projet avec Adrien (merci pour l’initiation et le conseil d’ailleurs), ce dernier m’a donné une piste super intéressante, il n’est pas possible de graver ou de découpe une pièce de plus de 8mm de haut avec les machines du fablab (atelier du breil ou plateforme C), donc exit la gravure de la profondeur des prises sur une bloc de bois sorti de la fraiseuse comme évoqué avant, mais il est possible de coller des pièces de bois entre elles grâce à de la colle à bois ou de l’epoxy, avec cette technique la pièce n’est plus limitée en hauteur ou presque. Une solution pour réaliser un hangboard fait d’une pièce (différent de celui dont je parle dans l’update 2) serait de diviser un design de hangboard en feuilles de 5 à 8 mm et de les coller entre elles après. Cette solution apporte de nouvelles possibilités mais aussi de nouvelles contraintes de formes donc il faut que je l’étudie plus avant de l’essayer, à suivre.

Update 4: époxy + découpe laser en couches

(écrit le 08/03/2021 et traduit le 08/03/2021)

Pour la découpe du hangboard et l’assemblage je pourrais m’inspirer de ce projet :

Carlitos.JPG

https://fablabo.net/wiki/Carlitos,_Le_Micro-c%C3%A9ros

Autres projets utilisant l’assemblage de pièces découpées au laser :

https://www.sculpteo.com/fr/decoupe-laser/materiaux-decoupe-gravure-laser/carton/

http://www.tubefr.com/decoupe-au-laser-3d-modeles_4.html

https://www.epiloglaser.fr/ressources/sample-club/mod%C3%A8le-3d-de-t%C3%AAte-de-tyrannosaure.htm

https://www.figurasfondo.fr/maquette-darchitecture-en-carton-gris/

http://services.superlipopette.net/portfolio/vilaine/

https://www.sculpteo.com/blog/fr/2017/01/23/nos-employes-utilisent-la-decoupe-laser-2/

https://www.pba-auctions.com/recherche?query=ANTHONY+ROUSSEL&btOk=

http://carrefour-numerique.cite-sciences.fr/fablab/wiki/doku.php?id=projets:maquette_topographique_3d (super intéressant pour la technique de divison en couches par logiciel, 123D Make, un logiciel d’autodesk (les mêmes que pour fusion 360) https://autodesk-123d-make.fr.softonic.com/)

J’ai aussi commencé à me renseigner sur l’epoxy :

Les polyépoxydes (epoxy) agissent comme une barrière étanche. Une fois « sec », il devient rigide et conserve sa forme, ce qui permet de l'utiliser pour renforcer les contenants qui en sont enduits. De plus, lorsque le mélange réactionnel polymérise, il réagit chimiquement avec de nombreux matériaux organiques ou minéraux. Cette réaction en fait une colle ayant un bon facteur de traction en présence de maints matériaux (bois, verre, porcelaine, métal, etc.).

2-part epoxy adhesive in cartridge.JPG

La colle époxyde est composée de deux éléments toxiques : la résine et le durcisseur. Quand le mélange est parfaitement dosé, la polymérisation rend le matériau durci relativement stable et neutre.

Risques liés à la manipulation d’epoxy sans protection selon Wikipédia :(https://fr.wikipedia.org/wiki/Poly%C3%A9poxyde )

• Irritation cutanée, causée par les résines, mais plus encore par les durcisseurs.

• Eczéma de contact, par les résines les plus sensibilisantes (plutôt que les durcisseurs), avec éventuelles atteintes du visage (dont paupières…). On observe des dermatoses professionnelles chez les travailleurs exposés.

• Des réactions allergiques

• Ces résines ne semblent pas induire d'asthme ou de cancers. Toutefois un cas unique d'eczéma de contact évoluant en lésion cancéreuse est observé.

Il faut donc porter des protections adéquates lors de la manipulation d’époxy (gants, masque anti-poussière bien hermétique et lunettes de sécurité) et travailler dans un environnement aéré.

Sites français :
http://www.cnsl.fr/methode-dassemblage-en-bois-epoxy/ (mine d’infos sur les meilleurs techniques d’assemblages à inclure dans le design)
https://www.futura-sciences.com/maison/questions-reponses/bricolage-colle-epoxyde-utilisation-supports-2216/
https://www.bricoleurdudimanche.com/fiches-materiaux/colles/les-colles-epoxydes.html
http://b10rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr.e-monsite.com/pages/resines-et-composites/les-risques-de-l-utilisation-de-la-resine-epoxy.html (site sur les risques) 
Sites anglais :
https://www.youtube.com/watch?v=dyo97JZuCL8
https://homeguides.sfgate.com/how-to-use-an-epoxy-adhesive-13416902.html
https://www.loctiteproducts.com/en/know-how/build-things/epoxy.html#:~:text=to%20remove%20epoxies-,What%20is%20epoxy%20glue%2C%20and%20what%20are%20its%20uses%3F,a%20double%20syringe%2C%20for%20example.
https://dalchem.com.au/how-to/what-is-epoxy-resin-used-for
https://www.youtube.com/watch?v=fw9-Xct-p70
https://www.youtube.com/watch?v=Ojsi2H-p21c
https://www.youtube.com/watch?v=OG9mr95od24

Update 5 : un pas en avant, deux pas en arrière

(écrit le 09/03/2021 et traduit le XX/XX/XXXX)

Avec les infos et photos du constructeur j’ai commencé la modélisation 3D sur Fusion 360 (beurk, je sais, mais je suis familiarisé avec car mon école m’a formé dessus, mais à therme il faudra que je m’en sépare pour blender mais je n’ai pas le courage de le faire pour le moment). J’ai obtenu un résultat plus que moyen, disons-le un raté (aucune photo ne sera publiée, j’en ai honte tellement c’est loin du résultat attendu), le problème était que je n’arrivais pas à reproduire précisément les courbes du modèle (si c’était un objet décoratif ou un objet que je ne devais pas prendre en main, aucun problème, mais tout l’intérêt d’un hangboard est basé sur les angles et la profondeur de ses courbes pour pouvoir y glisser une main. J’ai donc cherché à trouver un design tout fait. Et là miracle, j’en ai trouvé deux avec un qui avait même de succinctes instructions d’impression sur le site suivant :

https://www.yeggi.com/q/max+grip+max+climbing+by/

Yeggi.png
Lien direct vers les 2 fichiers STL :
https://www.thingiverse.com/thing:4623619 (avec petites instructions)
https://www.thingiverse.com/thing:4064011 (modèle plus en courbe, plus ressemblant à l’original mais jamais imprimé et sans instructions) 

En dessous du premier fichier il y avait les instructions suivantes : « Use at least 60% infill for strong part and FuzzySkin in Cura for better grip. », traduction, remplissage minimum 60% pour avoir une pièce assez solide et utiliser le réglage FuzzySkin dans le slicer cura pour avoir un meilleur grip/ prise en main. Bon bah maintenant il reste « plus qu’à » imprimer et tester en vrai

Anglais / English

Introduction

(written on the 16/02/2021 and translated on the 16/02/2021)

I enjoy indoor climbing and I did it every week in a climb gym for 3 years until february 2020. During the first lockdown, I realised that I wasn't able to train as in the past because i hadn't any training tool do do it, so i searched on the web and i found something that would fit my need. It is called a hangboard or afingerboard and it's made out of wood or polyester (PE) ou de Polyuréthane (PU) (climbing holds are made out of this last 2 materials).

Exemple de hangboard.jpg

A lot of them are on sale on the internet (amazon, etsy, ebay, ...), the one found were very good, but weren't perfect for me, it was either to expensive or to big, or out of stock or not delivered to France. That's why i started watchinng on facebook groups, reddit and other blog if someone has already tried, and the answear is yes. Some people used a 3d rointer and glued the part on a wood plate and some people used a bigger wood plate and used a CNC. The advantages of a homemade hangboard are:

  • I will learn how to use all the tools
  • I will be able to design it to fit perfectly my needs (and if it's not perfect it will be my fault)
  • I will be able to make to the size of my bag and my home, the other solution would be to carry it outside of the bag like so https://www.instagram.com/p/CLXfngiDtZh/
  • I will be able to add things with a laser engraver like the value of depth of the hole (it can change if you choose to in the 3D model), drawings of little jokes or video games character)


Some examples that inspire me:

  • example of the use of a router (not a CNC one) to build a hangboard:

https://www.reddit.com/r/climbing/comments/f5azoo/i_made_a_portable_hangboard_this_is_now_my_main/ https://www.youtube.com/watch?v=LSRrjSp5Y6Q&feature=youtu.be


  • example of the use of a CNC router to build a hangboard:

https://www.instagram.com/p/CI-2ElrBbrI/?utm_source=ig_web_copy_link

https://www.youtube.com/watch?v=GqKXfgYmYnY&t=1075s

https://www.youtube.com/watch?v=jZM4e-bpJ3o

  • example of the use of a 3D printer to build a hangboard:

https://www.youtube.com/watch?v=ZEeW0PrMDNk

  • example of 3D modeling of a hangboard:

https://www.youtube.com/watch?v=jZM4e-bpJ3o

  • example of easy way out that i would like to avoid if possible

https://www.youtube.com/watch?v=R7qPZ8QKBqE

Update 1: design ideas

(written on the 17/02/2021 and translated on the 24/02/2021)

After some time doing research, I found out that if I was going to make my own hangboard, i coud add some special features like the following ones:

  • a hangboard with laser engraving like this one:

https://www.etsy.com/fr/listing/796412206/gemini-top-out-climbing-split-portable?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=portable+hangboard&ref=sr_gallery-1-6&from_market_listing_grid_organic=1

https://www.instagram.com/p/CKL4-rRHCYh/

  • a easily transportable hangboard with a rope that would be used to hang it out or some holes to fix it to a wall or a beam. Here are some links to some hangboard that i like:

https://www.instagram.com/p/CKI8JuwDX9-/

https://www.instagram.com/p/CKRapK2jdR4/

https://www.instagram.com/p/CJ616qWFJjg/

https://www.instagram.com/p/CJGBC1sD6nO/

https://www.instagram.com/p/CJ_MSVIDEGM/

https://www.instagram.com/p/CJ_Mez-j9zd/

https://www.instagram.com/p/CJ_MhwyDowk/

https://www.instagram.com/p/CJ1zCUJjAI2/

https://www.instagram.com/p/CJjSlNuj-g7/

https://www.woodrock.fr/produit/poutre-descalade-transportable/

https://www.ebay.fr/i/114162367263

https://www.tensionclimbing.com/product/flash-board/

https://www.ebay.fr/itm/Escalade-Climbing-Fingerboard-Portable-Hangboard-Training-Board-Hang-pair-/114162384871

  • a phone support with a timer on it to time the exercise time with a notch on the top of the wooden hangboard or 3D printed bracket such as the following:

https://www.instagram.com/p/CKw3PfqDrkS/

https://www.instagram.com/p/CLZj6GIoGil/

https://www.instagram.com/p/CJ1FNulreEu/

https://www.instagram.com/p/CIycN_Kl5Ol/?utm_source=ig_web_copy_link

https://www.thevola.com/product/hangboard/


  • I have also seen little custom carrying bag, they look amazing (a new project?):

https://www.instagram.com/p/CKMq0cajHNh/

https://www.instagram.com/p/CKNAoWGjWe9/

https://www.instagram.com/p/CKFTi9njqi2/

  • a hangboard for each hand si they would be smaller, easy to carry and easy to make (each part of the hangboard would be connected together with a rope to hang out the whole thing to a beam or screws fixed to a support before) such as the following:

https://www.instagram.com/p/CKzJK1ICTHM/

https://www.instagram.com/p/CKSAf09Hk7P/

https://www.instagram.com/p/CJ_3tGlHSHQ/

https://www.instagram.com/p/CJdTBrFDAbY/

https://www.instagram.com/p/CJq4l-BJ175/

https://www.oliunid.fr/vola-portable-hangboard-prises-portables-d-escalade.html

https://www.maxclimbing.com/shop/training-equipment/maxgrip/

maxgrip:

weight:1.6kg/3.8lb

dimension: 21.5 × 15 × 10.5 cm/8.5 x 6 x 4.2 inch

If I want to 3D model it, I would just have to use the rule of three on the value I have and the pics and drawings from their website (links before)

  • a fixed support for the single hand hangboards (I talked about them just before if you missed) to attach them at home like thi one:

https://www.instagram.com/p/CLRKDBFDrB5/

https://www.maxclimbing.com/shop/training-equipment/basewood/maxgrip-combo/

https://www.maxclimbing.com/shop/training-equipment/basewood/maxgrip-combo/

  • a smart hangboard, another project?:

on sale options:

https://www.thegearcaster.com/2014/07/zlagboard-a-smart-hangboard.html https://climbro.com/

https://www.kickstarter.com/projects/entralpi/entralpi-make-your-hangboard-smart

DIY solutions:

http://timetotinker.weebly.com/smart-hangboard

https://www.reddit.com/r/climbharder/comments/doqioq/isometryx_opensource_digital_hangboard/

  • other small hangboard designs that i like:

https://www.instagram.com/p/CLPQL_mng3X/

https://www.instagram.com/p/CJWlKi0JQ4W/

https://www.instagram.com/p/CJUAXpRnmrD/

https://www.instagram.com/p/CLKwnvjjqZL/

https://www.instagram.com/p/CKNKvt5jg-Q/

https://www.instagram.com/p/CKxT5HJgfLD/

https://www.thegearcaster.com/2017/02/training-grips-for-both-rock-and-alpine-climbing.html

https://www.oliunid.fr/problemsolver-triangle-prise-portable-d-escalade.html

https://www.oliunid.fr/rustam-climbing-monik-mono-doigt-portable.html

https://www.oliunid.fr/woodoclimb-twins-prise-d-escalade-portable.html

https://www.oliunid.fr/rustam-climbing-quadrock-prise-portable-d-escalade.html

https://www.oliunid.fr/iseclimb-factory-hangy-prises-portables-d-escalade.html

https://www.oliunid.fr/metolius-wood-rock-rings-prises-portables-d-escalade.html

https://www.etsy.com/fr/listing/649526066/ensemble-de-gstring-portable-rock?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=portable+hangboard&ref=sr_gallery-1-29&from_market_listing_grid_organic=1&cns=1

https://www.etsy.com/fr/listing/840445479/anneaux-delta-hangboard-portable-blocs?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=portable+hangboard&ref=sr_gallery-1-15&from_market_listing_grid_organic=1

https://www.etsy.com/fr/listing/800958289/the-pretzel-hangboard-set-of-2-hexs?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=portable+hangboard&ref=sr_gallery-1-10&from_market_listing_grid_organic=1&sca=1

https://youtu.be/W-5o6Y7rjQw

  • a ring to hang my chalk bag, my climbing holds brush and allen wrench:

https://www.instagram.com/p/CLZj6GIoGil/

https://www.instagram.com/p/CLUbkhHoQA7/

https://www.instagram.com/p/CKkE7PJDY8t/

https://www.instagram.com/p/CJ9L4jtnd7f/

https://www.instagram.com/p/CJ2yAHtjtzT/

  • an external support all made of wood that avoids stretching wires to the ceiling or making holes in walls or beams:

https://www.instagram.com/p/CJLXnLWjoEV/

  • rings on the sides to hold training balls or one-handed hangboards:

https://www.instagram.com/p/CJJQy6LjEAw/

Update 2: choice of design and start of 3D modeling

(written on the 24/02/2021 and translated on the 05/03/2021)

I finally decided, my first prototype will be inspired by maxgrip's design and will be 3D printed, depending on the results, I will continue my research to find a new solutions but if the prototype meets my specifications, the project will stop there.

As a reminder, the manufacturer gives us the following dimensions:

21.5 × 15 × 10.5 cm /8.5 x 6 x 4.2 inch

list of images used for 3D modeling:

https://www.google.com/search?q=maxgrip&safe=strict&rlz=1C1CHBF_frFR934FR934&sxsrf=ALeKk0367mBerXZQN772nEia-MeRabdtTg:1614153883860&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjsy_Dmh4LvAhWKyoUKHaHlBwMQ_AUoAnoECBEQBA&biw=1396&bih=686#imgrc=6PKKnRVJY1IVdM http://www.gratteronetchaussons.fr/2017/09/20/test-des-maxgrips-by-max-climbing/ https://lafabriqueverticale.com/fr/test-maxgrip-hybrid-plus-legers/

Update 3: new technique

(written on the 06/03/2021 and translated on the 06/03/2021)

Forma.png
Kisspng-epoxy-coating-gelcoat-fiberglass-water-5b18595fb2d616.2609853915283223997325.png

I took part in the initiation to the laser cutter offered by PING (super interesting, I recommend you if you have never approached this technology). During a discussion on the applications of this technology to my project with Adrien (thank you for the initiation and the advice by the way), he gave me a super interesting advice, it'snt possible to burn or to cut a part more which height is more than 8mm with the machines of the fablab (breil's workshop or platform C), so there wouldn't be engraving of the depth of the hangboard's grips on a block of wood taken out of the milling machine as mentioned before, but it is possible to glue pieces of wood together with wood glue or epoxy, with this technique the piece is no longer limited in height or almost. One solution to making a one-piece hangboard (different from the one I talked about in Update 2) would be to divide a hangboard design into 5 to 8mm sheets and glue them together afterwards. This solution brings new possibilities and freedom but also new constraints of shapes so I have to study it more before trying it, to be continued.

Update 4: epoxy + laser cutting into layers

(written on the 08/03/2021 and translated on the 08/03/2021)

For the laser cutting of the hangboard and the assembly I could take inspiration from this project:

Carlitos.JPG

https://fablabo.net/wiki/Carlitos,_Le_Micro-c%C3%A9ros

Other projects using the assembly of laser cut parts:

https://www.sculpteo.com/fr/decoupe-laser/materiaux-decoupe-gravure-laser/carton/

http://www.tubefr.com/decoupe-au-laser-3d-modeles_4.html

https://www.epiloglaser.fr/ressources/sample-club/mod%C3%A8le-3d-de-t%C3%AAte-de-tyrannosaure.htm

https://www.figurasfondo.fr/maquette-darchitecture-en-carton-gris/

http://services.superlipopette.net/portfolio/vilaine/

https://www.sculpteo.com/blog/fr/2017/01/23/nos-employes-utilisent-la-decoupe-laser-2/

https://www.pba-auctions.com/recherche?query=ANTHONY+ROUSSEL&btOk=


http://carrefour-numerique.cite-sciences.fr/fablab/wiki/doku.php?id=projets:maquette_topographique_3d (very interesting for the technique of division into layers using the software named 123D Make, an autodesk product (the same people who made fusion 360) https://autodesk-123d-make.fr.softonic.com/)

I also started learning about the use of epoxy:

Polyepoxides (epoxy) act as a tight barrier. Once dry, it becomes rigid and retains its shape, which makes it possible to use it to reinforce the containers which are coated with it. In addition, when the reaction mixture polymerizes, it reacts chemically with many organic or inorganic materials. This reaction makes it a glue with a good tensile factor in the presence of many materials (wood, glass, porcelain, metal, etc.).

2-part epoxy adhesive in cartridge.JPG

Epoxy glue is made up of two toxic elements: the resin and the hardener. When the mixture is perfectly dosed, polymerization makes the cured material relatively stable and neutral.

Risks associated with handling epoxy without protection according to Wikipedia (https://en.wikipedia.org/wiki/Epoxy):

• Skin irritation, caused by resins, but more so by hardeners.

• Contact eczema, by the most sensitizing resins (rather than hardeners), with possible damage to the face (including eyelids, etc.). Occupational dermatoses are observed in exposed workers.

• Allergic reactions

• These resins do not seem to induce asthma or cancer. However, a single case of contact eczema evolving into a cancerous lesion is observed.

You must therefore wear adequate protection when handling epoxy (gloves, well-sealed dust mask and safety glasses) and work in a ventilated environment.

French websites:
http://www.cnsl.fr/methode-dassemblage-en-bois-epoxy/ (a lot of informations on the best assembly process to include in the hangboard's design)
https://www.futura-sciences.com/maison/questions-reponses/bricolage-colle-epoxyde-utilisation-supports-2216/
https://www.bricoleurdudimanche.com/fiches-materiaux/colles/les-colles-epoxydes.html
http://b10rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr.e-monsite.com/pages/resines-et-composites/les-risques-de-l-utilisation-de-la-resine-epoxy.html (website about the risks)
English websites:
https://www.youtube.com/watch?v=dyo97JZuCL8
https://homeguides.sfgate.com/how-to-use-an-epoxy-adhesive-13416902.html
https://www.loctiteproducts.com/en/know-how/build-things/epoxy.html#:~:text=to%20remove%20epoxies-,What%20is%20epoxy%20glue%2C%20and%20what%20are%20its%20uses%3F,a%20double%20syringe%2C%20for%20example.
https://dalchem.com.au/how-to/what-is-epoxy-resin-used-for
https://www.youtube.com/watch?v=fw9-Xct-p70
https://www.youtube.com/watch?v=Ojsi2H-p21c
https://www.youtube.com/watch?v=OG9mr95od24